Select your paint defects.

View Solution
Fine Scratches
Fine Scratches
View Solution
Loss Of Adhesion
Loss Of Adhesion
View Solution
Corrosion
Corrosion
View Solution
Colour Fading
Colour Fading
View Solution
Loss Of Gloss
Loss Of Gloss
View Solution
Orange Peel
Orange Peel
View Solution
Dirt & Dust
Dirt & Dust
View Solution
Pinholes
Pinholes
View Solution
Chalking
Chalking
View Solution
Poor Opacity
Poor Opacity
View Solution
Sagging
Sagging
View Solution
Craters
Craters
View Solution
Blisters
Blisters
View Solution
Stone Chipping
Stone Chipping
View Solution
Polishing Mark
Polishing Mark
View Solution

Loss Of Adhesion

Weakened material attraction between paint coats & substrates.
AFTER
BEFORE
CAUSES
  • Improper primer selection
  • Unclean surface before repainting
TREATMENT
  • Remove coats with poor adhesion
  • Sand & clean substrates thoroughly with Nax degreaser
  • Repaint with Nax Premila 238 2K Primer, Nax Premila 2400 Urethane Primer Grey, Nax Superio 2200 Primer, or Nippon Ultima U-750 Epoxy Primer

SPECIALLY RECOMMENDED

Our top suggestions for you.
NAX DEGREASER

A degreasing and cleaning agent for degreasing and cleaning grease, oil, wax, silicone and dirt on the surface or old paint film of the repaired area before repainting.

Easy Cleaning
Fast Dry
Mild Odour
NAX 238 2K PRIMER & NAX 238 2K PRIMER HARDENER

Two component isocyanate cure polyurethane primer for all types of refinish topcoat. It has an excellent build, sanding property and also gives a film base for an optimum finish.

Excellent Adhesion
Excellent Build
Excellent Filling Properties
Easy Workability
NAX 2400 URETHANE PRIMER GREY & NAX 240 URETHANE PRIMER HARDENER

Two-pack fast drying light grey sanding primer filler with excellent application and sanding properties. Due to its fast ambient drying, it helps to reduce process time and provides exceptional enamel hold-out with all Nippon topcoats.

Good Adhesion
Excellent Build
Good Filling Properties
NAX 2200 2K PRIMER GREY & NAX 2200 2K PRIMER HARDENER

Two component quality acrylic urethane primer surfacer for automotive refinishes with excellent application and sanding properties. Designed for all spray applications from spot repair to overall repair. Provides excellent filling and gloss hold out.

Best For Spot Repair
Fast Dry
Can Be Polished Within 2-hours
Excellent Filling Properties
Easy Workability
Good Adhesion
NIPPON ULTIMA U-750 EPOXY PRIMER & U-75 PRIMER HARDENER

A two-component Epoxy Primer that is suitable for 1st coat over new metal of buses, trucks or vehicles.

High Corrosion & Chemical Resistance
Excellent Adhesion To Steel, Aluminium, & Fibre
Good Filling Properties

GET YOUR VEHICLE PAINTED AT THESE WORKSHOPS

We have authorised painting workshops all across Malaysia, ready to assist you with your painting needs.

Select State

  • Johor
  • Kedah
  • Klang Valley
  • Melaka
  • Negeri Sembilan
  • Pahang
  • Penang
  • Perak
  • Sarawak
  • Seremban
  • Terengganu
GOOGLE MAP